INSTALL INSTRUCTIONS C-TCB-27
DODGE RAM 1500 PICK-UP 2002-2007
DODGE RAM 2500 & 3500 PICK-UP 2003-2007
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE:
QTY DESCRIPTION
PART #
1
1
1
Pole support assembly
Telescoping pole assembly
Lag bolt ¼ x 1
CM93071-27W
CM93072-3
GSM33060
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
Telescoping pole
assembly
1. Confirm receipt of all hardware and components.
2. Remove front inner and outer passenger seat bolts on
vehicle.
INSTALLATION:
1. MOUNT C-TCB-27 INTO VEHICLE:
• Position pole support assembly on top of
passenger seat base mount and align holes in
pole support assembly with holes in seat base.
• Loosely attached factory seat bolts that were
removed during sub assembly.
Pole support
assembly
•
Tighten down factory passenger seat bolts and
5/16-18-nylock nut holding side support brace
to pole support assembly.
• Mount optional C-3090, computer-mounting
platform, to telescoping pole assembly using
hardware and instructions provided with
C-3090.
Location of
passenger side factory
seat base bolts
C-TCB-27-INST-3-07
|
Grindmaster Coffee Grinder AT 3WR User Manual
Grindmaster Coffeemaker OPOD User Manual
Haier Water Heater FCD JTHMG50 III FCD JTHMG60 III FCD JTHMG80 III FCD JTHMG100 III User Manual
Hamilton Beach Blender HBB250S User Manual
Harbor Freight Tools Drill 7528 User Manual
HP Hewlett Packard Air Cleaner 20 Feb User Manual
HP Hewlett Packard Switch AARTDZHTE 958000284008 User Manual
HP Hewlett Packard Wheelchair 4937A User Manual
Husqvarna Sewing Machine 870 QUILT User Manual
Hypertec Carrying Case 6101HY User Manual